Cram it Gowad. That has nothing to do with reality.
Can't recall anything where you did, but now that you bring up that point it probably fits in with why I put you on ignore and why you will be going back there after this post.
Of course, because it's easier to ignore me, then answer the question...:lol:
I already pointed to to two sources (a vid and a paper prepared by 'scientists') that replicated the fire. Those results, even though presented, were not the ones promoted in the 'official story'.
I saw that, but none of them were in the correct context, I asked you explain it. You can't, so ignore me.
That one promoted a failure via sagging and that resulted in the inner and outer columns being pulled in by those same weakened floor-joists. With all your 'professed credentials' I didn't ever hear you say that was an impossibility, when I and observer from another industry have to wait for the results to come back from the labs you would have already known the theory was and intentional lie and you said nothing about it till 6 posts ago in this thread (minus the pictures). That was enough to slide you over into the 'liar' category and since the rest of your posts aren't worth reading in the first place you made history by being the first one on my ignore list.
Of course, again, because I embarrass you when I force you to admit you can't answer the questions, lol.
In the process you also proved yourself to be a knowing liar spreading bull**** that you know is bull****. Even I (zero papers) knows a flimsy hot floor-joist cannot move a colder bor massive piece of steel let alone cause it to break. lol
Prove it.
About 1/8" wire in a pattern of 4" squares is what my dictionary says. 6" would be 2" longer on each side of the square and come with a stronger wire. Shall I go on or do you want me to slide-rule the wire in the picture provided in the report.
That's sufficient, now can you tell what it is you think this material is capable of?
It has to do with the accuracy of the 'official story', the one you carefully have no opinion about. Bad science needs to be investigated.
Really? Please explain how it relates to the investigation?
I thought you could read that sort of paper?? #3 is the mark it got at the end of the test. Imagine that same fire on much larger pieces of steel, wait that is an impossible task for a liar.
I know exactly what the test was for, I can also read the chart, I don't need someone to tell me what it has no relevance to, like yourself. I know you don't know what it means, or why it was performed, which is why you will call me a liar and put me on ignore.
It proves the first investigation was flawed, and that means the taxpayers who are paying for the war have a right to know there should even be a war. Liars don't like to promote that aspect of 911, a fact you are quite well aware of.
Really? :lol:
That just proves your spoon fed nonsense and really have no clue, thank you for that.
Part of an investigation that they refused to consider in the end. If you have 12 'diplomas' and you can swallow that theory then you better start listening to people who have 24 'diplomas'. I posted a link to a vid that questioned the fall of WTC7 (in the last page or two). Feel free to note the time stamps on all the spots you find this person, who is much more qualified than you in steel building construction, to be in error. Even Dex wouldn't support a few bolts being a strong enough joint to pull either steel columns, actually if he read it in a book he would without even questioning it.
First of all, I said 12 certificates. In welding, as well as blueprint reading and drafting. But I see since you have no idea what you're talking about...
Quite...Good bye liar. Which is exactly what you are. You merely parrot what others have spoon fed you. So not only are you a liar, you're an inept one at that...