Quote: Originally Posted by MHz
It can be painted on, it doesn't have to be explosive, turning a 3ft section yellow hot would be the very same as a clear cut. It could take 10 mins to burn/heat, the end effect is the very same. That molten metal that is flowing out isn't all that long before destruction. With the aircraft doing damage to one side (not destructive even with fire) only the columns on the far side of the core would need to be heated to make similar damage on that side. (and the corners of the outer shell).
The pics I posted say your lieing and the amount of thermite needed(posted also here) show how much would be needed so big time fail so far.
I posted the formula,it would take truckloads of the stuff to do what your suggesting.
I wonder how they got it all in and the thousands of pounds of explosives in undetected.
I wonder how they managed to get in and weaken all the support columns by cutting as they do in all demolitions un noticed,that would take months.
I wonder how they set all the det caps,boosters and charges un noticed,in a building that size their would have to be lots of it,it would take months.
I wonder how they ran all the shocktube or prima cord undetected as its very subject to shock(hence the name shocktube) and would have to be duct taped to every charge,then doubled back and and reconnected many times in case the first one didnt go off.
I wonder why there has been no evidence of blasting detritus witnessed anywhere ever during the clean up.
I wonder why there are no sounds of explosions that compare with the hundreds of live video's of other controlled demolitions. There isnt one,just some media attention ***** going around doing tours saying he "thought" he heard explosions even though he was in the basement when the jet hit the building,wonder if thats what he heard?
I wonder why what some call squibs are seen to be going off after the building starts collapsing(thats what initiates the detonation in a controlled demo)These HAVE to go off first or there is no detonation.The building is well on it's way down when you see what some say are squibs but is actually air from many floors pancaking,the air has to go somewhere and took the path of least resistance.
No evidence of det caps,no evidence of boosters or explosives which ALLWAYS survive a blast and I mean allways.
The reason they survive is because the oxygen is consumed very fast in an explosion and any fires present are allways after the blast,the stuff should have been spread out for blocks yet not a single piece was found,no one has provided any evidence of any,not one single shred.
I wonder why no big reputable Demo company in the whole world has yet to support this as a demo,not one single one and they are the experts.
The one person that came out and claimed this was a demo and he was an expert turns out to be an "explosive hobbyist"
Pull is not a blasting term,there isnt a blaster in the world that will say it is,not one.
You will hear a warning 2 minutes before any blast,I will ask for radio silence for now untill after the blast,2 minutes to blast time is what they say,then you hear ten seconds to blast time. Radio silence is maintained from when electric blasting was widely used,now it's mainly non electric but done for safety reasons anyways.
In non elec blasting you rely on the shock from a primer cap,same size as used in a 22 cal starter gun,it sets off the shock through a hollow tube that rips down the line to the delays and then det caps and boosters and major charge.
Nowhere in any video of the building collapse can you hear the bang that would have happenned if useing explosives.
No such term as "pull" in blasting when initiating a shot.
Last edited by Kakato; Jan 17th, 2010 at 08:02 PM..