Inside Canada's most decrepit prison

B00Mer

Make Canada Great Again
Sep 6, 2008
47,127
8,145
113
Rent Free in Your Head
www.canadianforums.ca
Inside one of Canada's most decrepit prisons: Baffin Correctional in Iqaluit



IQALUIT, Nunavut – The intake cell at what may be Canada’s most decrepit prison at one time offered all sorts of useful information.

Names on the walls would let you know who was inside. Tidbits such as “—- is a rat” might suggest who couldn’t be trusted.

And the sentence once carved into the door was probably the most succinct orientation new prisoners ever received to Nunavut’s notorious Baffin Correctional Centre in Iqaluit.

“It said, ‘Welcome to hell,'” recalled guard Susan Idlout. “When that door closes and you see that, you don’t feel so good.”

It’s all been removed by a $900,000 renovation that is cleaning up the prison’s pervasive mould, its broken fire sprinklers, its punched-out walls, its uncleanable bathrooms. A new building next door has eased overcrowding and prisoners no longer bunk down in the gym.

“It was pretty gross walking in there in the morning,” said director of corrections JP Deroy. “Thirty men and no bathroom.”



But a federal auditor general’s report released in March remains harshly critical of corrections in Nunavut.

“The Department of Justice has not met its key responsibilities for inmates within the correctional system,” it concludes.

That assessment was echoed by an email from a senior Nunavut bureaucrat to Justice Minister Paul Okalik earlier this year. Deputy justice minister Elizabeth Sanderson wrote: “Nunavut is likely in significant breach of constitutional obligations towards remanded accused and inmates … and faces a high risk of civil liability towards inmates, staff and members of the public.”

A walk with Deroy through the battered building known unaffectionately as BCC reveals why, in 2013, a federal investigator said it was unsafe for inmates and staff.

Built for 68 minimum-security prisoners, it has averaged more than 80 and up to 115 at any one time, from all security levels, including remand. That kind of overcrowding, with six prisoners in nine square metres of cell, wears on a building.

Vandalized sprinkler heads allowed water to seep into walls. Floors around overused toilets were constantly damp. Mould was everywhere. So was the odour of mildew.



Holes in hallway walls attest to too many men in too small a space with too much anger.

“The wall is an easy target,” said Deroy.

In one still-used cell, heat registers were falling off the wall and ceiling tiles were dropping. A patched hole that had been chipped through the wall once allowed the passage of drugs and money to other cells.

Because BCC wasn’t built to maximum-security standards, holes are common. The outside of the building is pocked with metal plates sealing off passageways punched through by prisoners.

Deroy tells of one inmate opening a ceiling-light fixture, sneaking through the ducting and breaking into the prison canteen.

The toll overcrowding has taken on the building is nothing compared to its toll on inmates. With no space to segregate the dangerous prisoners from the rest, violence has been common.

Auditor general Michael Ferguson noted that physical assaults on inmates, staff or visitors more than tripled to 185 between 2002 and 2012. A carving program in the prison yard was cancelled years ago because participants were being forced to mule contraband.

“Some of the carvers got beat up pretty good,” said Idlout.

Space for education is makeshift. With no room to do much other than warehouse inmates, little programming is conducted.

The auditor general found that out of 24 inmates surveyed, none had case plans designed to guide their rehabilitation. Only one-third of prisoners needing mental services had access to them.

Nor is the overcrowding good for Nunavut communities. Deroy said judges know what BCC is like and, if they can, sentence accordingly.

“You often see people on probation that if they were down south, they would be sentenced to custody.

“If we had one wish as to what we would need, we’d ask for space. We need space.”

Things are improving. New paint and renovations mean the place no longer smells like a damp dishtowel.

An adjacent 48-bed, minimum-security facility called Makigiarvik that opened in March is easing some of the overcrowding. So is a new 48-bed minimum- and medium-security prison in Rankin Inlet.

Deroy hopes the new facilities will help keep numbers in the old building down to about 60.

“We’re able to separate our groups,” he said. “It actually allows us to work more closely with the offenders and do the programming that we want to do.”

Makigiarvik, a $16-million bright, fresh place with a proper classroom and high ceilings, gives Deroy a carrot to motivate offenders to good behaviour.

And it gives him a little peace of mind.

“When we didn’t have this building, you go to bed at night thinking, ‘Is this the night you’re going to get a call that something major is happening?’ I sleep a little better now.”

Still, the auditor general says Nunavut has a way to go.

Even with the new facilities, he predicted Nunavut will be short 70 prison beds within the next decade. And there’s still no maximum-security space.

“The Department of Justice should acquire sufficient maximum-security beds and also ensure that medium-security inmates and those on remand are properly housed,” the report says.

The territorial government has provided an official response: “The Corrections Division recognizes the need for maximum-security beds and that currently the territory’s maximum-security needs are not being met. In conjunction with other government departments we are exploring further funding options to address our capacity needs.”

A “business case” for a maximum-security facility is being prepared, the response says.

Deroy said the offenders under his charge deserve at least that much.

“These people that are with us, they come from our families. They come from our communities.

“They’re our people.”

source: Inside one of Canada's most decrepit prisons: Baffin Correctional in Iqaluit - CityNews
 

MHz

Time Out
Mar 16, 2007
41,030
43
48
Red Deer AB
They might to try connecting these dots.

Vandalized sprinkler heads allowed water to seep into walls. Floors around overused toilets were constantly damp. Mould was everywhere. So was the odour of mildew.
dot
dot
dot
Holes in hallway walls attest to too many men in too small a space with too much anger.
 

MHz

Time Out
Mar 16, 2007
41,030
43
48
Red Deer AB
Not one dot connector in the whole lot, since it was expected it isn't a surprise really other than torment of the prisoners seem to be something that is just fine. This our version of a 'black prison' where the inmates are also the lab rats. Mould over time is pretty much like torture for all intensive purposes sine the effects are widely known and the elimination of mould is as difficult as spraying the area with white vinegar so there is no excuse for it to be there in large quantities.

Mold Prevention Strategies and Possible Health Effects in the Aftermath of Hurricanes and Major Floods

Summary

Extensive water damage after major hurricanes and floods increases the likelihood of mold contamination in buildings. This report provides information on how to limit exposure to mold and how to identify and prevent mold-related health effects. Where uncertainties in scientific knowledge exist, practical applications designed to be protective of a person's health are presented. Evidence is included about assessing exposure, clean-up and prevention, personal protective equipment, health effects, and public health strategies and recommendations. The recommendations assume that, in the aftermath of major hurricanes or floods, buildings wet for >48 hours will generally support visible and extensive mold growth and should be remediated, and excessive exposure to mold-contaminated materials can cause adverse health effects in susceptible persons regardless of the type of mold or the extent of contamination.
For the majority of persons, undisturbed mold is not a substantial health hazard. Mold is a greater hazard for persons with conditions such as impaired host defenses or mold allergies. To prevent exposure that could result in adverse health effects from disturbed mold, persons should 1) avoid areas where mold contamination is obvious; 2) use environmental controls; 3) use personal protective equipment; and 4) keep hands, skin, and clothing clean and free from mold-contaminated dust.
Clinical evaluation of suspected mold-related illness should follow conventional clinical guidelines. In addition, in the aftermath of extensive flooding, health-care providers should be watchful for unusual mold-related diseases. The development of a public health surveillance strategy among persons repopulating areas after extensive flooding is recommended to assess potential health effects and the effectiveness of prevention efforts. Such a surveillance program will help CDC and state and local public health officials refine the guidelines for exposure avoidance, personal protection, and clean-up and assist health departments to identify unrecognized hazards.

How Persons Are Exposed to Mold
Mold exposure can produce disease in several ways. Inhalation is usually presumed to be the most important mechanism of exposure to viable (live) or nonviable (dead) fungi, fungal fragments or components, and other dampness-related microbial agents in indoor environments. The majority of fungal spores have aerodynamic diameters of 2--10 µm, which are in the size range that allow particles to be deposited in the upper and lower respiratory tract (5). Inhalation exposure to a fungal spore requires that the spore be initially aerosolized at the site of growth. Aerosolization can happen in many ways, ranging from disturbance of contaminated materials by human activity to dispersal of fungi from contaminated surfaces in heating, ventilating, and air-conditioning (HVAC) systems. Fungal spores also can be transported indoors from outdoors. Overall, the process of fungal-spore aerosolization and related issues (e.g., transport, deposition, resuspension, and tracking of fungi to other areas) are poorly understood.
Persons can be exposed to mold through skin contact, inhalation, or ingestion. Because of the ubiquity of mold in the environment, some level of exposure is inevitable. Persons can be exposed to mold through contact with airborne spores or through contact with mycelial fragments. Exposure to high airborne concentrations of mold spores could occur when persons come into contact with a large mass of mold, such as might occur in a building that has been flooded for a long time. Exposure to mycelia fragments could occur when a person encounters a nutrient source for mold that has become disrupted, such as would occur during removal of mold-contaminated building material. Skin contact or exposure by inhalation to either spores or mycelial fragments also could occur in a dusty environment, if the components of dust include these fungal elements.
For the majority of adverse health outcomes related to mold exposure, a higher level of exposure to living molds or a higher concentration of allergens on spores and mycelia results in a greater likelihood of illness. However, no standardized method exists to measure the magnitude of exposure to molds. In addition, data are limited about the relation between the level of exposure to mold and how that causes adverse health effects and how this relation is affected by the interaction between molds and other microorganisms and chemicals in the environment. For this reason, it is not possible to sample an environment, measure the mold level in that sample, and make a determination as to whether the level is low enough to be safe or high enough to be associated with adverse health effects.
Persons affected by major hurricanes or floods probably will have exposure to a wide variety of hazardous substances distributed by or contained within the floodwater. This report does not provide a comprehensive discussion of all such potential hazards; such situations will of necessity require case by case evaluation and assessment. Guidance has been provided by CDC for such issues in a number of documents, including NIOSH Hazard Based Interim Guidelines: Protective Equipment for Workers in Hurricane Flood Response (9) and the CDC guidance: Protect Yourself From Chemicals Released During a Natural Disaster (10).

Potential Health Effects of Fungal Contamination

In recent years, the health effects of exposure to mold in built environments have been a subject of intense public concern. These concerns and how they are approached will have important implications for the reconstruction and rehabilitation of cities in states affected by major hurricanes or floods.
Many clinical conditions could be caused by the fungal contamination associated with flooding after major hurricanes or floods. Predicting what might occur is speculative. However, many of these conditions are uncommon and will be recognized only if there is a high clinical index of suspicion (Table 2). Anticipating what medical problems could be associated with post-flood fungal contamination might help in preventing them by identifying susceptible populations and making recommendations for reducing potentially harmful exposures.
Although this report focuses on potential health effects of fungal contamination, other exposures are also of concern. For example, dampness favors proliferation of dust mites and microorganisms such as bacteria (44,45) and nontuberculous mycobacteria (46). Endotoxins (components of the cell walls of Gram-negative bacteria) have strong inflammatory properties (6,44,45,47--49). Moisture also can release chemical constituents from building materials (6). Standing water supports rodent and cockroach infestations (15,44,45) and proliferation of mosquitoes (30). Fecal contamination of the environment raises concerns about protozoal and helminthic parasites (50). Fungi are not the sole potential cause of many conditions discussed in this report, and these conditions are only a subset of the conditions of concern to clinicians and public health professionals dealing with the aftermath of major hurricanes or floods (51).
Overview of Fungal-Induced Diseases
Fungi can cause a variety of infectious (52--58) and noninfectious conditions (6,44,45,47,59,60). Several basic mechanisms can underlie these conditions, including immunologic (e.g., IgE-mediated allergic), infectious, and toxic (6). Several of these mechanisms contribute to pathogenesis of a fungal-induced disease. The types and severity of symptoms and diseases related to mold exposure depend in part on the extent of the mold present, the extent of the person's exposure, and the susceptibility of the person (e.g., persons who have allergic conditions or who are immunosuppressed are more susceptible than those without such conditions). Molds produce a variety of volatile organic compounds (6,7,60), the most common being ethanol (61), which are responsible for the musty odors associated with fungal growth. Exposure to moldy indoor environments is also associated with a variety of upper and lower respiratory tract symptoms (6).
 

MHz

Time Out
Mar 16, 2007
41,030
43
48
Red Deer AB
Pretty lousy set of jailers. Didn't you get the memo, mould if taken in large amounts over a long period ot time makes you stronger.

Actually it means the material is water soaked and it has very little strength.

http://s1300.photobucket.com/user/wgabler/media/4544/July13013_zps95ee7c6b.jpg.html?sort=3&o=51

They are probably some old ATCP trailers

I'd use mdf
For a jail? I'm going to change my mind about what it takes to connect some dots and why that doesn't happen around here.
 

MHz

Time Out
Mar 16, 2007
41,030
43
48
Red Deer AB
They still seem clueless about what was making the inmates so angry, it wasn't overcrowding it was the level of mould they were exposed to.
Thanks for being part of the distraction though. You might want to check your combine's exhaust system, you are exhibiting the first sign of unnatural changes.
This will be great news for the slumlords in the flatlands as they can just blame any conditions on the victim rather than negligence being front and center.

Wonder what you would get if you sprinkled mould on someone's sandwich. The somewhat slimy part is the same Judicial system that send people to a mould infested place demand every book in a Courthouse be decontaminated (as well as the rest of the building) if a speck of mould is found so I'm pretty sure they know what the effects are and that infections are lifelong conditions rather than exposures that leave no traces behing. By traces I mean the lungs become a breeding ground for live mould spores.
 

MHz

Time Out
Mar 16, 2007
41,030
43
48
Red Deer AB
You should know when you are being fed ****, if you can't tell the difference you are part of the problem and not part of the solution.
 

MHz

Time Out
Mar 16, 2007
41,030
43
48
Red Deer AB
Whiteman cannot do anything right, just ask the native criminals and the lefties.
Native as in inbred European stock criminals? Native in that they have been doing the same thing to people for centuries. It's one thing to be naturally cruel to things you don't care about, it's full blown insanity to use cruelity and then demand they never be subject to the same treatment.
 

MHz

Time Out
Mar 16, 2007
41,030
43
48
Red Deer AB
Don't commit crime if you don't like jail.
You mean mould infested jail. The whole of the inmates should be starting a class action lawsuit. If any inmate was killed or almost killed that is a criminal negligence charge. Be interesting to see what the prison was using as the model for a 'safe level of exposure'.
 

petros

The Central Scrutinizer
Nov 21, 2008
117,853
14,419
113
Low Earth Orbit
You mean mould infested jail. The whole of the inmates should be starting a class action lawsuit. If any inmate was killed or almost killed that is a criminal negligence charge. Be interesting to see what the prison was using as the model for a 'safe level of exposure'.

They should be cleaning up after themselves.

 

MHz

Time Out
Mar 16, 2007
41,030
43
48
Red Deer AB
Would they be happier in a concrete prison?
They would be happier in a dry and mould free prison. A somewhat stupid comment by you actually.
The good spin doctors should be able to turn this into bigger prsions make for happier prison as the level of anger will drop within a few months of getting into fresh air. The long term conditions that with it won't go away on their own and the Medical route doesn't seem to have an answer ot they save it for the guards and the prisopners can go fuk themselves as they have no injury, they are just angry people.

They should be cleaning up after themselves.

You have any references incidents when SWAT lets you clean-up after a fight breaks out over a game of 'Fish'?
I'm also quite sure you would be the guy sleeping on the floor.
 

petros

The Central Scrutinizer
Nov 21, 2008
117,853
14,419
113
Low Earth Orbit
Mold isn't an issue when you clean. What they need is to clean using zinc oxide cleaners which are readily available IF they clean up after themselves. Housekeeping is the responsibility of inmates not Corrections staff.

DON'T SH-T WHERE YOU EAT!!!
 

MHz

Time Out
Mar 16, 2007
41,030
43
48
Red Deer AB
There is no mould in that room, look at the bathrooms and laundry. inmates are not expected to keep the roof from leaking or to get rid of mould it creates.
What an uneducated loser you are, sold your soul to the lowest bidder. (or born 2x as stupid as anybody else to boot)