Cable Modem to Cable Router


Anonymous
#1
My Rogers cable modem works stand-alone, but I cannot get it to run through my Linksys router after setting it up for auto IP (it works fine as PPoE with sympatico). Anybody know why? I'm running XP. Thanks
 
frubsen
#2
Make sure you have it set to DHCP...not sure if that is the same as auto IP. Also make sure your mac address is correct.
 
Anonymous
#3
Yep, set to DHCP, but no go! MAC the same.
 
frubsen
#4
Plug the modem back into the nic card and release the IP, hook it back into the router and renew ip
 
Shmad
#5
You could hook it up thru the linksys, and if nothing else works try setting DHCP on and set your gateway as the routers internal ip address, this should work if you cant get it to work any other way.
 

Similar Threads

10
CABLE INTERNET HOOK UP HELP!!!
by credico | Mar 22nd, 2007
25
DSL vs. Cable: Which is superior?
by westmanguy | Feb 12th, 2007
2
Shaw cable internet
by Anonymous | Sep 16th, 2005
0
Your cable bill
by Andem | Sep 8th, 2004
1
Rogers now you can buy cable modem
by Anonymous | May 16th, 2004
no new posts